High Lifter 3 Inch Signature Series Lift Kit - 2010-21 Polaris Ranger
Item #: or-2562
Brand: High Lifter
In Stock
- Description
- Specifications
- Installation Guides
- Reviews
NOTES:
- 1.5" spacers are recommended, but a minimum of a 1" wheel spacer is required on the front if you are running 12" diameter factory or aftermarket wheels for the wheel to clear the tie rod with the alignment cones installed.
- If you are running wide tires, 1.5" or wider spacers may be required depending on the width of the tire to shock clearance at full lock steering.
Applicability: Polaris Ranger (see options above)
- 1.5" spacers are recommended, but a minimum of a 1" wheel spacer is required on the front if you are running 12" diameter factory or aftermarket wheels for the wheel to clear the tie rod with the alignment cones installed.
- If you are running wide tires, 1.5" or wider spacers may be required depending on the width of the tire to shock clearance at full lock steering.
Applicability: Polaris Ranger (see options above)
Features:
- 3" signature series lift kit
- Front and rear lift
- Zinc plating or powder coat finishes for long life in rugged conditions
- All installation hardware included
- Detailed step by step photo instructions
- High Lifter logo is precision laser cut into each kit
- High Lifter lifetime warranty
View PLK800R-51 Installation Instructions View PLK1000R-52 Installation Instructions View PLK1000R-53 Installation Instructions
